Application Tips

How to Apply a Inbloom Vinyl Stickers Video:

A smooth and solid surface, like a window, is the most ideal application surface. Clean and dry the area thoroughly where the sticker is to be applied. Apply the sticker on a surface between the temperatures of 60 to 80 degrees. If the surface is too hot or cold the sticker will not adhere properly. This may ruin the sticker or cause excessive air bubbles.

Step 1.
(Optional) Use scissors to separate artwork before you apply. Some of our designs have multiple images that can be spread out to create a custom look on the back window of your vehicle.

Step 2.
Place sticker face down on a flat surface. Carefully and slowly peel off backing paper away from the clear application tape making sure that all of the sticker remains on the clear application tape. This is the tricky part so take your time.

Step 3.
Then apply the sticker, sticky side down, to the desired location by rubbing the design to press out any air bubbles.

Step 4.
Very slowly peel back clear sheet making sure the sticker remains on the desired location. Afterwards, gently rub the sticker again to make sure sticker has adhered to surface.